Software Upgrades - Lowrance ELITE TI Installation Manual

Software upgrades

The update file must be loaded to the root directory of the memory
card.
The update may be initiated at boot up: insert the memory card into
the card reader before turning the unit on, boot the unit, and follow
the on-screen instructions.
Alternatively, in the Files menu, locate the update file on the
memory card inserted in the card reader and select Upgrade,
followed by This Display. Accept the prompt to reboot the unit,
and wait a few moments as the unit restarts. Do not remove the
memory card or repower the unit until the process is completed
(this typically takes no more than a couple of minutes).
NMEA 2000 device upgrades
NMEA 2000 is available on the ELITE-7Ti only.
The update file must be loaded to the root directory of a memory
card inserted in the card reader.
1.
Select the Files toolbar option and select the update file under
Memory card.
2.
Select the Upgrade option presented when the file is
highlighted. A list should appear displaying any compatible
devices the update file applies to. In most cases this will be a
single device.
Note:
Ú If no device is shown, check that the device to be
updated has power, and run any outstanding updates for
the unit first.
3.
Select the device and initiate the upgrade. Do not interrupt the
upgrade process.
Software Setup | ELITE Ti Installation Manual
49