Touchscreen Calibration - Lowrance ELITE TI Installation Manual

46
Serial Output Sentences
This list allows control over which sentences need to be transmitted
to other devices from the NMEA 0183 port. Due to the limited
bandwidth of NMEA 0183 it is desirable to only enable the data that
is required. The less sentences that are selected, the higher the
output rate of the enabled sentences.
Commonly used sentences are enabled by default.

Touchscreen calibration

Note:
Ú Ensure the screen is clean and dry before doing the
calibration. Do not touch the screen unless prompted to do
so.
In some cases it may be required to re-calibrate the touch screen. To
re-calibrate your touchscreen, do the following:
Software Setup | ELITE Ti Installation Manual