Ducati Multistrada 620 Owner's Manual page 137

2) Check that the stop switch (1, fig. 35) is positioned
to (RUN), then press the starter button (2).
This model features servo-assisted starting.
Press and immediately release the start button (2) to
use the servo-assisted engine starting function.
When you press the button (2) the starter motor
E
operates automatically for a maximum time determined
by engine temperature.
The system disengages the starter motor as soon as
the engine starts.
If the engine fails to start, wait at least 2 seconds
before pressing the start button (2) again.
Allow the engine to start on its own, without turning the
throttle twistgrip.
Notes
If the battery is flat the system automatically
disables operation of the starter motor.
Important
Do not rev up the engine when it is cold. Wait for the
engine oil to warm up. This will ensure that all the internal
components of the engine are correctly lubricated.
44
1
2
fig. 35