Water Hardness; Display; Volume - Miele DGC 5051 Operating Instructions Manual

Settings

Water hardness

Display

Volume

44
The appliance is set at the factory to water hardness
setting IV (Very hard). You can set the steam combi oven for
the water hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level
I
II
III
IV
The contrast and brightness can be adjusted.
The volume of the buzzer and keypad tone can be altered.
The volume is represented by a bar with seven segments. If
all of the segments are illuminated, the volume is set at
maximum volume. If none of the segments is illuminated, the
sound is switched off altogether.
Hardness range
1-7 °dH
(2.7-3.8 mmol/l)
8-14 °dH
(2.7-3.8 mmol/l)
15-21 °dH
(2.7-3.8 mmol/l)
>21 °dH
(above 3.8 mmol/l)
Setting
Soft
Medium
Hard
Very hard