Advertisement
FASTENING THE SAFETY SEAT BUCKLE
Step 1. Fig. 4-1: Slot the two metal sections of the buckle connectors together.
Step 2. Fig. 4-2: Slot the two buckle connectors into the slot in the top of the buckle until
they "click" into place.
Step 3. Fig. 4-3: Always check if the harness is correctly locked by pulling the shoulder
straps upwards.
To release the harness, press the red button on the buckle downwards.
TIGHTENING NAD SLACKENING THE HARNESS
fig. 5
TIGHTENING THE HARNESS
Fig. 5 – Pull the shoulder straps upwards to remove the slack from the lap sections of the
harness then pull the adjuster strap until the harness is fully tightened. The harness should be
adjusted as tightly as possible without causing discomfort to your child. Ensure that the lap
strap portion of the harness is located as low as possible towards the thighs-not around the
tummy. A loose harness can be dangerous. Check the harness adjustment and tighten each
time the child is placed in the seat.
SLACKENING THE HARNESS
Fig. 6 – The harness is slackened by pressing the lever (under the seat cover) on the front
of the seat. Press down on the label marked "Press" as you grip the two shoulder straps with
your other hand. Pull the shoulder straps towards you to loosen the harness. Take care when
you adjust the shoulder straps that you do not trap the harness adjuster straps as you press
the lever down.
1
fig. 4
2
6
fig. 6
3
Advertisement
