AT&T 2256 User Manual page 58

2.4 ghz cordless telephone answering system with caller id/call waiting
Hide thumbs Also See for 2256:
Table of Contents

Advertisement

TELEPHONE OPERATION
PROBLEM
If you hear a triple-beep The handset and base are not
signal when you try to
use the handset:
PROBLEM
If you hear noise or
interference when
using the phone:
PROBLEM
If the phone does not
ring when you receive
a call:
SOLUTION
communicating properly. You might
be out of range. Move closer to the
base and try again.
SOLUTION
• You may be out of range. Move closer
to the base.
• Household appliances plugged into the
same circuit as the base can sometimes
cause interference. Try moving the
appliance or the base to another outlet.
• The layout of your home or office may
be limiting the operating range. Try
moving the base to another location,
preferably on an upper floor.
• Using the handset near household
appliances (microwaves,computers,
televisions,stereos,etc.) can sometimes
cause interference. Move away from
appliances while using the handset.
SOLUTION
• Make sure the ringer is on.
• Make sure the telephone line cord is
connected firmly to the base and the
telephone jack.
• Make sure the AC adapter is plugged
firmly into an electrical outlet not
controlled by a wall switch.
• You might be too far from the base;
move closer.
• You might have too many extension
phones on your telephone line to allow
all of them to ring. Try unplugging some
of them.
5 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

1256

Table of Contents