Toyota TUNDRA 2004 Owner's Manual page 50

Hide thumbs Also See for TUNDRA 2004:
Table of Contents

Advertisement

SETTING THE SYSTEM
1. Turn the ignition key to the "LOCK"
position and remove it.
The indicator light will start flashing when
the key is removed from the ignition
switch.
2. Have all passengers get out of the
vehicle.
3. Close and lock all the doors and hood.
The indicator light will remain on when all
the
doors
and
hood
are
closed
locked.
'04 TUNDRA_U (L/O 0309)
The system will automatically be set after
30 seconds. When the system is set, the
indicator light will start flashing again.
4. After making sure the indicator light
starts flashing, you may leave the ve-
hicle.
Never leave anyone in the vehicle when
you set the system, because unlocking
from the inside will activate the system.
WHEN THE SYSTEM IS SET
Activating the system
The system will sound the alarm under
the following conditions:
If any of the doors is unlocked or
D
opened without the key or wireless re-
mote control transmitter, or if the hood
is forcibly opened
If the battery terminal is disconnected
D
and then reconnected
The indicator light will come on when the
system is activated.
If the alarm has been activated and the
key is not in the ignition switch, all the
and
doors will re−lock automatically.
After one minute, the alarm will automati-
cally stop and the indicator light will starts
flashing again.
Reactivating the alarm
Once set, the system automatically resets
the alarm after the alarm stops.
The alarm will activate again under the
same
circumstances
described
"Activating the system".
Stopping the alarm
The alarm will be stopped by the following
two ways:
Turn the ignition key from the "LOCK"
D
to "ON" position.
Unlock any of the doors with the key
D
or wireless remote control transmitter.
These ways cancel the system at the
same time.
2004 TUNDRA from Sep. '03 Prod. (OM34426U)
in
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents