—Positioning the jack
Front
Rear
5. Position the jack at the correct
jack point as shown.
Make sure the jack is positioned on
a level and solid place.
JACK POINTS:
Front—Under the frame side rail
Rear—Under the rear axle housing
380
'04 TUNDRA_U (L/O 0309)
Access and double cab models—Put
a jack handle, jack handle extension
and jack handle end together as
shown in the illustration.
1 Jack handle end
2 Jack handle extension
3 Jack handle
CAUTION
Make sure they are each securely
fixed with screws.
—Raising your vehicle
Standard cab models
Access and double cab models
2004 TUNDRA from Sep. '03 Prod. (OM34426U)