Toyota TUNDRA 2004 Owner's Manual page 368

TRAILER BALL
Follow these easy steps to properly deter-
mine the correct trailer ball for your ap-
plication:
1. Determine the correct trailer ball size
for the trailer coupler. Most couplers
are stamped with the required trailer
ball size. The sizes you will most likely
find stamped on the coupler are:
Trailer class Typical trailer ball size
IV 2 5/16 in.
II and III 2 in.
I 1 7/8 in.
2. Select the appropriate trailer ball to
match or exceed the gross
weight rating of the trailer. The trailer
ball load rating should be printed on
the top of the ball.
3. When mounted in the ball mount, the
threaded ball shank must protrude be-
yond the bottom of the lock washer
and nut at least 2 threads. The trailer
ball shank must be matched to the ball
mount hole diameter size.
'04 TUNDRA_U (L/O 0309)
NOTICE
Vehicles with 2UZ−FE engine (with
towing package)—Only
mount attachment specified for the
Toyota Tundra.
trailer
use a ball
BUMPER TOWING
The rear bumper
equipped with a hole to install a trailer
ball. The maximum gross trailer weight is
2268 kg (5000 lb.).
The maximum gross trailer weight
(trailer weight
when towing with the bumper must
never exceed 2268 kg (5000 lb.).
2004 TUNDRA from Sep. '03 Prod. (OM34426U)
of your vehicle is
CAUTION
plus cargo weight)
359