Toyota TUNDRA 2004 Owner's Manual page 392

—Lowering your vehicle
9. Lower the vehicle completely
and tighten the wheel nuts.
Standard cab models—Turn the jack
handle counterclockwise to lower the
vehicle.
Access and double cab models—Turn
the jack handle extension counter-
clockwise with handle to lower the ve-
hicle, making sure the handle remains
firmly fitted onto the jack handle ex-
tension.
'04 TUNDRA_U (L/O 0309)
Use only the wheel nut wrench and
turn it clockwise to tighten the nuts.
Do not use other tools or any addition-
al leverage other than your hands,
such as a hammer, pipe or your foot.
Make sure the wrench is securely en-
gaged over the nut.
Tighten each nut a little at a time in
the order shown. Repeat the process
until all the nuts are tight.
CAUTION
D When lowering the vehicle,
make sure all portions of your
body and all other persons
around will not be injured as
the vehicle is lowered to the
ground.
D Have the wheel nuts tightened
with torque wrench to 110 N·m
(11.5 kgf·m, 83 ft·lbf), as soon
as possible after changing
wheels. Otherwise, the nuts
may loosen and the wheels
may fall off, which could cause
a serious accident.
—Reinstalling wheel ornament
Type A
Type B
2004 TUNDRA from Sep. '03 Prod. (OM34426U)
383