Rotating Tires - Toyota TUNDRA 2004 Owner's Manual

Hide thumbs Also See for TUNDRA 2004:
Table of Contents

Advertisement

CAUTION
Observe the following instruc-
tions. Otherwise, an accident
may occur resulting in death or
serious injuries.
D Do not mix radial, bias belted,
or bias−ply tires on your ve-
hicle, as this may cause dan-
gerous handling characteris-
tics resulting in loss of control.
D Do not use tires other than the
manufacturer's recommended
size, as this may cause danger-
ous handling characteristics
resulting in loss of control.
D Four−wheel drive models:
Do not use tires of different
brands, sizes, construction or
tread patterns, as this may
cause
dangerous
handling
characteristics
resulting
loss of control.
'04 TUNDRA_U (L/O 0309)
For vehicles with vehicle stability
control system—
D Do not use tires of different
brands, sizes and construc-
tions. This may damage the
drive system and prevent the
vehicle stability control system
from functioning correctly.
Toyota recommends all four tires,
or at least both of the front or rear
tires be replaced at a time as a set.
See "If you have a flat tire" in Section
4 for tire change procedure.
When a tire is replaced, the wheel
should always be balanced.
An unbalanced wheel may affect ve-
hicle handling and tire life. Wheels
can get out of balance with regular
use and should therefore be balanced
occasionally.
in
When replacing a tubeless tire, the
air valve should also be replaced
with a new one.

Rotating tires

With a spare tire of the same
wheel type as the installed tires
2004 TUNDRA from Sep. '03 Prod. (OM34426U)
425

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents