Wireless Remote Control System - Toyota TUNDRA 2004 Owner's Manual

Hide thumbs Also See for TUNDRA 2004:
Table of Contents

Advertisement

For easy access to the rear seat, open
the access door (rear door).
To open: First, open the front door widely.
Then pull the outside handle or inside le-
ver of the access door.
If you try to open the front and rear doors
simultaneously, they will not open.
To close: First, close the access door
completely. Then close the front door.
You can open and close the access door
only when the front door is widely opened.
NOTICE
The front door and access door could
be damaged if they hit each other
when being opened or closed. Be
sure to follow the above instructions.
'04 TUNDRA_U (L/O 0309)
Wireless remote control
(standard and access cab
models for U.S.A. only)
Locking operation
Unlocking operation
The wireless remote control system is
designed to lock or unlock all the
doors or activate the "PANIC" mode
from a distance within approximately 1
m (3 ft.) of the vehicle.
LOCKING
AND
UNLOCKING
DOORS
To lock and unlock all the doors, push
the switches slowly and securely.
To lock: Push the "LOCK" switch. All the
doors are locked simultaneously. At this
time one beep will be heard, and the tail
lights and front side marker lights will
flash once.
Check to see that the doors are securely
locked.
If any door is not securely closed, locking
cannot
be
performed
by
the
switch and a beep will sound continuously
for 5 seconds. However, if the key is in
the ignition, a beep will not sound.
To stop the beep, close all the doors se-
curely or push the "UNLOCK" switch.
2004 TUNDRA from Sep. '03 Prod. (OM34426U)
THE
"LOCK"
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents