Panasonic FZ-B2 series Operating Instructions Manual page 16

Handling and Maintenance
n Preventing your computer from unauthorized use via Wi-Fi/Bluetooth/
Wireless WAN
l Before using Wi-Fi/Bluetooth/Wireless WAN, make the appropriate security set-
tings such as data encryption.
n Sensors
This computer is equipped with four sensors (acceleration sensor, gyro sensor,
magnetic sensor, ambient light sensor), and you can use these sensors with any
software that is compatible.
As the accuracy of each sensor output is dependent on the operating environment
and other conditions, the results should only be used as a reference.
The acceleration sensor, gyro sensor, and magnetic sensor are located at the bot-
tom left of the LCD. The detection results of each sensor may vary depending on
the display mode, how you are holding the computer, the application software you
are using, and other factors.
l Automatic brightness adjustment
The computer is equipped with an automatic brightness adjustment function
that adjusts the display screen based on the ambient light sensor. You can
configure the automatic adjustment function as follows.
A Touch - [
B Touch [AUTO] to select the automatic adjustment function.
The ambient light sensor is located at the top of LCD.
The ambient light cannot be detected properly if this area is obstructed or dirty.
16
Settings] - [ Display] - [Brightness].