Handling And Maintenance - Panasonic FZ-B2 series Operating Instructions Manual

Handling and Maintenance

Operation environment
l Place the computer on a flat stable surface not subject to shock, vibration, and
danger of dropping. Do not place the computer upright or turn it over. If the
computer is exposed to an extremely strong impact, it may become damaged.
l Operating environment
Temperature: Operation : -10
Humidity:
Even within the above temperature/humidity ranges, operation for a long time
in extreme environments, smoking nearby, or operation in places where oil is
used or where there is a lot of dust will result in the product deterioration and
will shorten the product life.
*1
Do not expose the skin to this product when using the product in a hot or cold
environment.
If the computer is wet in temperatures of 0
may occur. Make sure to dry off the computer in such temperatures.
l Do not place the computer in the following areas, otherwise the computer may
be damaged.
Ÿ Near electronic equipment. Image distortion or noise may occur.
Ÿ In extremely high or low temperature.
l As the computer can become hot during operation, keep it away from items
that are sensitive to heat.
Handling cautions
This computer is designed to minimize shock to parts such as the LCD and the
flash memory drive, but no warranty is provided against any trouble caused by
shock. Be extremely careful when handling the computer.
l When carrying the computer:
Ÿ Turn off the computer.
Ÿ Remove all external devices, cables, Smart Cards and other protruding ob-
jects.
Ÿ Do not drop or hit the computer against solid objects.
Ÿ Do not grip the display part.
l When you board an airplane, take the computer with you and never put it in
your checked luggage. When using the computer on airplane, follow the air-
line's instructions.
l When carrying a spare battery, put it in a plastic bag to protect its terminals.
14
°C
°C
Storage : -20 to 60
%
Operation : 30 to 80
%
Storage : 30 to 90
°C °F
to 50 {14 to 122
°C °F
{-4 to 140
%
RH (No condensation)
%
RH (No condensation)
°C °F
{32
°F
} (IEC60068-2-1, 2)
°F
}
} or below, freeze damage
*1