Table of Contents
Advertisement
9.8 Camera command
You can select a camera for playback by the [Camera] command in the [View] menu.
[16Multi], [9Multi], [4Multi], [No.1] to [No.16]
--------------------- For operation of these commands, please refer to Section 3.2 "Operation panel"
(
pages 8 and 9).
[All] ---------------- You can display pictures from all the cameras, switching them sequentially.
9.9 Overlay command
You can select data to display on the screen by the [Overlay] command in the [View] menu.
[Camera No.] --- Use to display the camera number.
[Alarm Mode] --- Use to display the alarm type when an alarm-recorded picture is displayed.
[Title] -------------- Use to display the camera title, if any.
- 21 -
Advertisement
Table of Contents
