Table of Contents
Advertisement
(h) Initial Setup tab
When you click the [Initial Setup] tab on the [Menu Setting] window, you can make basic settings.
[HDD]
---------- When you click the [HDD Setting] button, the [HDD Setting] window will appear. You
can make settings related to HDD repeat recording, HDD repeat playback, and IM-
check playback using this window.
[Audio Recording]
---------- You can make settings related to audio recording.
[Rear Terminal]
---------- When you click the [Rear Terminal Setting] button, the [Rear Terminal Setting] window
will appear. You can make settings related to Mode Out, button tone, buzzer, HDD
remaining capacity, emergency recording duration, and Call Out.
[Communication]
---------- When you click the [RS-232C Setting] button, the [RS-232C Setting] window will ap-
pear. You can make settings related to remote control of the digital recorder by a com-
munication device (such as a personal computer), transfer rate, etc. using this window.
When you click the [LAN Setting] button, the [LAN Setting] window will appear. You can
set the IP address, sub net mask, gateway, service port, various notifications, and retry
interval of the digital recorder using this window.
[Language]
---------- You can select Japanese or English as the menu language of the digital recorder.
- 42 -
Advertisement
Table of Contents
