Table of Contents
Advertisement
NUMERIC BUTTONS 0-9
While listening to a CD a specific track number can be played by pressing
the relative digit on the number buttons. e.g.: track 6 would be 06. To play
track 12 you would press the 1 button then 2.
CD OPERATION
PROGRAM PLAYBACK
You may wish to play back tracks of a CD in a different order than the
original disc was recorded in.
1. Press the PROGRAM button to enter the program setup function.
2. Use the / buttons to skip between the play order numbers.
3. Set the play order track numbers using the numeric keys.
For example: the diagram on the right would play track 02 as the first track
and track 14 as the second track.
4. When tracks 1-2 are set, use the / buttons to access further play
order screens. Repeat steps 2-3 for the remainder of the program play
list.
5. When complete, use the / buttons to scroll across to the arrow on
the right of the display and press the ENTER or PLAY/PAUSE button to
begin playback.
6. To cancel the program sequence, press the STOP/MENU button twice.
(The first press is to stop the playback, and the second is to cancel.)
NOTE: The program function is not supported with CD MP3.
RANDOM CD OPERATION
1. Press the SHUFFLE button on the remote control. The CD contents will
be played once in a random order. You will see 'SHUFFLE' on the
display.
2. To cancel the random operation, press the SHUFFLE button again. You
will see 'OFF' on the display.
Play Order
Track Number
8
Advertisement
Table of Contents
