LENCO MC-148 DAB+ User Manual page 13

DAB+ OPERATION
Channel Frequency
Displays the frequency information for the current station.
Signal Error
Displays information regarding the error rate in the signal.
Bit Rate
This displays the type of broadcast you are receiving e.g. mono or stereo
and what bit rate is being used.
SECONDARY SERVICES
On some occasions you will see a ">>" symbol directly after the name of the
station. This indicates that there are secondary services available to that
station.
These secondary services contain extra services that relate to the primary
station, e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station.
1. To activate a secondary service press the FFWD  on the remote. You
will see that the >> has changed to a << to indicate you have selected
the secondary service.
2. Press the ENTER or PLAY/PAUSE button to begin playback of the
service.
3. To return to the original service, press the FRWD  and then ENTER or
PLAY/PAUSE.
PRUNING
When the radio has performed a scan in several locations, you may find
there are stored stations that you can no longer receive.
This function automatically removes them from the stored station list.
1. Press the STOP/MENU button in DAB+ mode, and use either / on
the unit, / on the remote to find <Prune>. Press the PLAY/PAUSE
button on the main unit or ENTER button on the remote.
2. Use the / buttons on the remote to select YES and press ENTER or
PLAY/PAUSE to select.
12