Table of Contents
Advertisement
DAB+ OPERATION
Switch to DAB+ mode by pressing SOURCE button on the unit or DAB/FM
button on the remote control.
AUTO SCAN MODE
1. To activate the full scan press the STOP/MENU button.
2. When you see the <Autoscan> option, press the PLAY/PAUSE or
ENTER button. The unit will search for all available DAB+ stations that
can be tuned.
MANUAL TUNING
As well as an auto tune function, you can manually tune the receiver.
1. Press the STOP/MENU button in DAB+ mode, and use either / on
the unit, / on the remote to find <Manual tune>. Press the
PLAY/PAUSE button on the main unit or ENTER button on the remote
to activate the manual tune options.
2. Now use the / on the unit, / on the remote to cycle through the
DAB+ ensembles/multiplexes, which are numbered from 5A to 13F.
3. Press
the
ensemble/multiplex details. Press the ENTER or PLAY/PAUSE button
again to enter the multiplex.
4. To see what stations are present in the found ensemble/multiplex, just
press either / on the unit, / on the remote. When you've located
a station that you would like to listen to, press the ENTER or
PLAY/PAUSE button.
5. Any stations found during the manual tune operation will be added to
your station list.
STORING STATION PRESETS
It is possible to store up to 10 of your favorite stations. This will enable you
to access your favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would
like to save.
2. Then press & hold one of the numeric buttons from 1-0 to store the
station under that number. You will see Preset X Stored appear on the
display with X being the number you stored the station under.
or
ENTER
PLAY/PAUSE
10
button
to
view
the
Advertisement
Table of Contents
