Related Manuals for LENCO MC-140
Summary of Contents for LENCO MC-140
- Page 1 INSTRUCTION MANUAL MICRO MUSIC CENTRE WITH CD PLAYER, PLL RADIO AND USB/SD/MMC INTERFACE MC-140...
-
Page 2: Important Notes
IMPORTANT NOTES INTRODUCTION Thank you for buying this product. Please read through these operating instructions, so you will know how to operate your equipment properly. Store the manual in a save place for future reference after you finished reading the instructions. Put it away in a safe place for future reference. -
Page 3: Location Of Controls
LOCATION OF CONTROLS... -
Page 4: Names Of Controls
NAMES OF CONTROLS CD COMPARTMENT CD REPEAT BUTTON CD DOOR OPEN/CLOSE CD RANDOM BUTTON LCD DISPLAY CD STOP BUTTON CD PLAY/PAUSE BUTTON USB PORT REMOTE SENSOR SD/MMC CARD SLOT USB INDICATOR VOLUME UP/DOWN CONTROL POWER ON/OFF BUTTON CD SKIP BACK/FORWARD & RADIO STANDBY INDICATOR TUNING UP/DOWN CONTROL MEMORY UP / ALBUM + BUTTON... -
Page 5: Radio Operation
Clock adjusting 1. In standby mode the LCD display will show --:-- flashing. Press and hold the C-ADJ/MEMORY button for about 3 seconds. The display will show the 24 hours or the 12 hours version. Press CD SKIP FORWARD/TUNING UP button to choose for the 12 or 24 hour version. Press the C-ADJ/MEMORY button to confirm. - Page 6 1. Set the unit to TUNER mode. 2. Press BAND button to select band (AM or FM), and tune into a station. 3. Press the MEMORY button. "MEMORY" shows on the display. Then press MEMORY UP button or Memory DOWN button to select the first storing location. 4.
- Page 7 PROGRAM TRACKS Program tracks of disc are possible when playback is stopped. Up to 64 tracks can be stored in the memory in any order. 1. In stop mode, press MEMORY button to enter program setting, the display will show 00 P -- 01. Press the CD SKIP BACK/FORWARD &...
- Page 8 TUNING UP/DOWN button pressed for two seconds. Use the SKIP CD BACK/FORWARD & RADIO TUNING UP/DOWN button to skip within the selection. When pressing the FIND/ST/ESP button twice, album names can be searched. To playback your selection, press the CD PLAY/PAUSE button. LISTENING TO USB/SD/MMC CARD USB PLAYBACK 1.
-
Page 9: Remote Handset
7. Press the STOP button to stop program playback. Note: Switch the unit to CARD-USB or CD/MP3 playing mode, follow the above steps to proceed PROGRAM TRACKS ON SD/MMC CARD or ON MP3 disc. TO FIND A DESIRED TRACK (not for CD) To listen to the desired track, press the FIND/ST/ESP button once to search FILE, press again to search ALBUM, press the MEMORY button, the track number within this album is flashing, press the CD SKIP BACK/FORWARD &... -
Page 10: Specifications
4. Cleaning a disc Should the disc become soiled, wipe off dust, dirt and fingerprints with a soft cloth. The disc should be cleaned from the center to the edge. Never use benzene, thinners, record cleaner fluid or anti-static spray. Be sure to close the CD door, so the lens is not contaminated by dust.