Rs-232C Command Table - Mitsubishi Electric MT819 Operation Manual

Controlling the Monitor with a PC (RS-232C)

RS-232C command table

How to read the command table
Command: Command fi eld (See page 12.)
Direction: W When the "Parameter" is set in the parameter fi eld (see page 12), the command functions as described
R The returned value indicated under "Reply" can be obtained by setting "????", "
Parameter: Parameter fi eld (See page 12.)
Reply: Response (Returned value)
*: "A" indicates a command which can be used in power standby mode regardless of the STANDBY MODE
setting.
"B" indicates command which can be used in power standby mode when STANDBY MODE is set to
STANDARD. (It cannot be used in the power standby mode when LOW POWER is selected.)
"–" indicates a command which cannot be used in power standby mode.
Power control/Input mode selection
Function
POWER CONTROL
INPUT MODE SELECTION
SCREEN menu
Function
AUTO
CLOCK
PHASE
POSITIONING POSITION OF
THE LONGEST
DIRECTION
POSITION OF
THE SHORTEST
DIRECTION
SIZE POSITION OF
THE LONGEST
DIRECTION
POSITION OF
THE SHORTEST
DIRECTION
RESOLUTION L-DIRECTION RES HRES
S-DIRECTION RES VRES
RESET
16
E
under "Control/Response Contents".
(repeater control) in the parameter fi eld (see page 12).
Command Direction Parameter
POWR W
R
INPS W
R
Command Direction Parameter
ASNC W
CLCK WR
PHSE WR
HPOS WR
VPOS WR
HSIZ WR
VSIZ WR
WR
WR
ARST W
Reply
0 Switches to standby mode.
1 Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
0 Toggle change for input mode. Terminals not selected in DVI SELECT/
BNC SELECT/HDMI SELECT cannot be selected.
1 PC1 DVI-D
"ERR" when AV1 DVI-D is selected for DVI SELECT.
2 PC3 D-SUB
3 AV3 COMPONENT
"ERR" when PC4 RGB is selected for BNC SELECT.
4 AV5 VIDEO
6 PC4 RGB
"ERR" when AV3 COMPONENT is selected for BNC SELECT.
7 AV1 DVI-D
"ERR" when PC1 DVI-D is selected for DVI SELECT.
8 AV4 S-VIDEO
9 AV2 HDMI
"ERR" when PC2 HDMI is selected for HDMI SELECT.
10 PC2 HDMI
"ERR" when AV2 HDMI is selected for HDMI SELECT.
1 PC1 DVI-D
2 PC3 D-SUB
3 AV3 COMPONENT
4 AV5 VIDEO
6 PC4 RGB
7 AV1 DVI-D
8 AV4 S-VIDEO
9 AV2 HDMI
10 PC2 HDMI
Reply
1 When the input mode is PC3, PC4.
0-1200 0-1200 When the input mode is PC3, PC4. Varies depending on the signal.
0-63 0-63 When the input mode is PC3, PC4.
0-100 0-100 0-800 on PC3/PC4.
Varies depending on the signal.
0-100 0-100 0-200 on PC3/PC4.
Varies depending on the signal.
0-100 0-100
0-100 0-100
300-1920 300-1920 When the input mode is PC3, PC4.
Only even numbers are valid for parameters.
200-1200 200-1200
Varies depending on the signal.
1
?" or "???+"
Control/Response contents
Control/Response contents
*
A
A
A
*
-