High Performance Low Profile Ptz Unit Basic Operation; Figure 3: High Performance Low Profile Ptz Unit Channel Id Number - BCF Solutions DOG 2 PTZ User Manual

High Performance Low Profile PTZ Unit Basic Operation

Each High Performance Low Profile PTZ unit draws its power and data commands from, and transmits
its video to, the Base Station. The High Performance Low Profile PTZ unit can be placed up to 500m
from the DOG Base Station, using CAT-5 cable with no external power source required. The High
Performance Low Profile PTZ Channel ID number (1-8 for 8 channel systems and 1-4 for 4 channel
systems) is indicated by a decal on the bottom of the unit as seen in the figure below and must be
connected to the corresponding channel on the Base Station. * Make sure to keep track of the channel
number of each High Performance Low Profile PTZ unit.

Figure 3: High Performance Low Profile PTZ Unit Channel ID Number

To operate the High Performance Low Profile PTZ unit, the user simply selects the channel of the camera
from the buttons on the front of the Base Station DVR and then pushes the Dome button on the DVR.
This brings up an on-screen message which indicates that the pan-tilt arrow buttons on the DVR are
active. At this point, pushing the arrow buttons moves the camera as indicated by the arrow buttons.
Details of the High Performance Low Profile PTZ unit setup are provided in the following sections.
4