Figure 12: Attaching Camera Tube Cable To Pan Tilt Unit; Figure 13: Attaching Cat-5 Cable To Pan Tilt Unit - BCF Solutions DOG 2 PTZ User Manual

Figure 12: Attaching Camera Tube Cable to Pan Tilt Unit

Next connect the Pan Tilt's Power/Video/Data Cable to the Pan Tilt unit as shown in Error! Reference
source not found.. Make sure and align the connector so that the single notch is at the top and the two
notches are on the bottom to match the receptacle. Push the connector in and tighten the ring clockwise.

Figure 13: Attaching CAT-5 Cable to Pan Tilt Unit

11