Connecting Ptz Units To The Base Station; Figure 23: Connecting The Thermal Camera Cable To The High Performance Low Profile Ptz - BCF Solutions DOG 2 PTZ User Manual

Figure 23: Connecting the Thermal Camera Cable to the High Performance Low Profile PTZ

Connecting PTZ Units to the Base Station

Connecting the High Performance Low Profile PTZ unit to the base station consists of three steps: (1)
connecting the High Performance Low Profile PTZ unit to the corresponding channel on the DOG Base
Station VPD using CAT-5 cables, (2) connecting the VPD channels to the corresponding channels on the
Base Station DVR, and (3) connecting the PTZ port on the VPD with to the appropriate port on the Base
Station DVR (depending on DOG version). The High Performance Low Profile PTZ unit channel IDs
are provided on a decal on the bottom of the unit as seen in Figure 3. The figure below shows the
described connections for a 4 channel DOG system. Even if only one or several High Performance Low
Profile PTZ units are employed, the channel numbers should always match the PTZ id numbers.
18