Specifications - Mitsubishi 230SB User Manual

Specifications

Monitor Specifications
Picture Tube
Viewable Image Size: 20 inch/508 mm
Input Signal
Display Colours
Synchronization Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory Setting)
Active Display Area (Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature: +5°C to +35°C/+41°F to +90°F
Storage Temperature: -20°C to +60°C/-4°F to +140°F
NOTE: Technical specifications are subject to change without notice.
Diamond Plus 230
Diagonal: 22 inch/550 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Negative) (TTL Level)
Analog input: Unlimited number of Colours
Horizontal: 30 kHz to 115 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 160 Hz
1024 x 768 @ 50 to 138 Hz
1280 x 1024 @ 50 to 105 Hz
1600 x 1200 @ 50 to 91 Hz ...................... NEC-Mitsubishi Electronics Display cites
1800 x 1350 @ 50 to 81 Hz
1800 x 1440 @ 50 to 76 Hz
1856 x 1392 @ 50 to 79 Hz
1920 x 1440 @ 50 to 76 Hz
Horizontal: 396 mm/15.6 inches
Vertical: 297 mm/11.7 inches
406 mm/16.0 inches
304.6 mm/12.0 inches
AC 100-120 V/220-240 V, 50/60 Hz
1.25A @ 100-120 V / 0.6A @ 220-240 V
495 mm (W) x 484.5 mm (H) x 471 mm (D)
19.5 inches (W) x 19.1 inches (H) x 18.5 inches (D)
29.0 kg
64.0 lbs
Humidity: 10% to 90%
Altitude: 0 m (0 ft) ~ 3,000 m (10,000 ft)
Humidity: 10% to 90%
Altitude: 0 m (0 ft) ~ 15,000 m (50,000 ft)
SB Monitor
English-10
Notes
90° deflection, 0.24 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, G-WARAS coating
Depends on display card used.
Automatically
Automatically
Some systems may not support all
modes listed.
recommended resolution a 85 Hz for
optimal display performance.
Dependent upon signal timing used, and
does not include border area.
Dependent upon signal timing used, and
does not include border area.