Controls - Mitsubishi 230SB User Manual

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor function as follows:
Main Menu
EXIT Exits the OSM menu.
NOTE:
Moves the highlighted area left/right to
CONTROL /
select one of the sub-menu.
NOTE:
CONTROL -/+ Has no function.
NOTE:
SELECT/ Enters sub-menu.
SB MODE
When the OSM is off, it will act as the SuperBright (SB) function key. User can select between SB
MODE OFF, SB MODE1, and SB MODE2. The first time this key is pressed, the current SB Mode is
indicated. Within a 3 second window, if this key is selected again, the SB MODE will change to the
next SB MODE. For example, the current mode is SB MODE OFF, the key is pressed twice within a
3 second time frame, the SB MODE will change to SB MODE1 and so on. The colour temperature
at each SB Mode is adjusted by appropriate colour control except for the sRGB mode whose colour
setting cannot be adjusted. When the unit is turned off, it will reset to SB off mode.
RESET Resets all the controls within the
highlighted menu to the factory
setting.
NOTE:
Brightness/Contrast Controls
Brightness: Adjusts the overall image and background screen brightness.
Contrast: Adjusts the image brightness in relation to the background.
Degauss: Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the
purity of the screen colours, focus, and convergence. When activated, your screen image will jump and waver a bit as the
screen is demagnetised.
NOTE: Please allow a minimum of 20 minutes to elapse between uses of the Degauss function.
Constant Brightness: Sustains the brightness and screen colour levels consistently over the normal life of the monitor.
The Constant Brightness function requires a 30 minute warm-up of the monitor before the feature is fully functional.
Size and Position Controls
AutoAdjust: Automatically adjust the horizontal and vertical size and position settings for applicable timings.
NOTE: AutoAdjust is unavailable with no image signal or narrow size of image signal input.
Left/Right: Moves the image horizontally (left or right).
Down/Up: Moves the image vertically (up or down).
Narrow/Wide: Decreases or increases the horizontal size of the image.
Short/Tall: Decreases or increases the vertical size of the image.
Deactivates the OSM menu and activates the OSM menu when the OSM is
turned off.
When the OSM menu is off, it acts as a Hot key for Brightness.
Deactivates the OSM menu and to adjust Contrast with Hot key set "ON"
Super Bright Mode OFF: for text based images (normal use)
Super Bright Mode-1 ON: for images
Super bright Mode-2 ON: for moving image such as DVD movies
When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to select the reset function.
English-5
Sub-Menu
Exits to the OSM controls main menu.
Moves the highlighted area left/right to
select one of the controls.
Moves the bar in the – or + direction to
decrease or increase the adjustment.
Has no function.
Resets the highlighted control to the
factory setting.