Table of Contents
Advertisement
2. Installation
•
Camera Installation
Carefully remove the contents from the box, and verify that nothing was damaged in shipment.
1) Make screw holes for camera using the template sheet supplied
2) Remove the Camera Cover
3) Fix the camera using the anchors(2x) and screws(2x) provided.
•
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for connection
to a switch
Micro SD memory slot
Insert the SD memory card.
•
Connecting the Power ( If not using PoE)
Connect the DC 12V power adaptor to the camera.
•
Connecting the Wireless using WPS function.
Follow steps for a proper operation.
1. Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected Setup)
functions. WPS enables easy setup with compatible APs.
2. Press the WPS button on the camera board. You can then see the Status LED is blinking.
7
Advertisement
Table of Contents
