End Of Day Procedure (Essential - Transax Ingenico iWL252 Installation Instructions Manual

Step
4
Key in the Number used
to get an Outside Line
and then press ENTER
5. Card Sales and Refunds
When your terminal has been installed and successfully configured, you can
start to accept and process card payment transactions.
Most credit and debit cards issued in the UK and Ireland will be Chip and PIN
(Personal Identification Number) type cards. For security reasons, the cardholder
will need to confirm the transaction by typing their PIN into the terminal.
For further information on how to process a Chip and PIN card transaction
please refer to Section 15, (page 13) of the iWL200 Series Terminal User
Guide.
The iWL200 Series Terminal User Guide also provides information on how to
process other types of card transaction.

6. End of Day Procedure (essential)

The End of Day procedure should be done at the end of every working day to
ensure that your card transaction data is captured and that you will be paid
('settlement') for the transactions.
Step
1
READY
Merchant Number:
XXXXXXXX
TMS, iWL252 Bluetooth (PSTN/IP), Read Me First Installation Instructions, 1215 v2
Key your dial prefix as you would if you were
to make an outbound telephone call from the
line on which you intend to use your terminal.
The terminal supports a dial prefix of up to four
numeric values. For example, to add a dial prefix
of '9', press the 9 key and it will appear on
screen. Press the green ENTER key to continue.
Press the green ENTER key to skip through the
screens that follow and return to the 'READY'
prompt.
From the Ready Screen, press the MENU key
twice and select Totals by pressing the green
ENTER key.
Note: You may need to scroll through the
menu options by using the f2 and f3 keys
before selecting Totals.
Continued Overleaf