What's In The Box - Slendertone CONNECT ABS Instruction Manual

What's In The Box

1. Belt:
SLENDERTONE CONNECT ABS
Ergonomically designed belt for positioning the conductive
GelPads correctly. The belt fits waist sizes 24"-42"/ 61-
107cm. The controller is connected to the belt during use.
2. Controller:
SLENDERTONE CONNECT ABS
The controller generates signals which are sent, via the belt
and GelPads, to your muscles to contract and relax them
rhythmically.
3. Adhesive GelPads:
These adhesive GelPads are placed on the belt before use.
When you wrap the belt around your waist, these GelPads
must be in contact with your skin so the stimulation can be
sent to your muscles.
4. USB Cable:
Connect the USB cable to the controller and to any USB charger or to
your PC to recharge the battery. It takes a minimum of 3 hours to charge fully.
5. Instructions:
A detailed guide to setting-up and using your
SLENDERTONE CONNECT ABS
Note: app:
SLENDERTONE CONNECT ABS
You will also need to download the
SLENDERTONE CONNECT ABS
Need Any Help?
If you require any assistance setting up your product or have any other queries, please call customer care or send us
an email:
UK: 0345 070 77 77
Rep. of Ireland: 1890 92 33 88
USA / Canada: 1-800-551-2443
International: +353 94 902 9936
Email: info@slendertone.com
www.slendertone.com
6
1
5
2
4
3
app to access and run your personal toning programmes.
Controller
SLENDERTONE CONNECT ABS
The controller is connected to the belt and has a range of functions in the operation of your
Some of the functions can also be controlled using the app.
1. Power Button ( )
You must press this button to switch the controller on or off. You
can pause a toning session by pressing this button briefly. To
resume the session, simply press it briefly again. You can also
pause a session using the app.
Note:
The indicator light on the Power Button has a number of functions,
which are listed on page 8.
2. Intensity Up Button ( )
As well as controlling the strength of your toning session using the app,
you can also use this button to increase the strength of the stimulation.
This button will override the app control.
3. Intensity Down Button ( )
As with the Intensity Up Button, as well as controlling the strength of your toning session using the app, you can also
use this button to decrease the strength of the stimulation. This button will override the app control.
4. Stimulation Indicator ( )
This indicator light glows amber when your ab muscles are being stimulated. It has other functions, which are explained
on page 8.
5. Battery Indicator ( )
This dual-colour indicator light indicates the amount of charge left in the battery in the sequence shown on page 8.
Note:
If the battery is completely discharged, this indicator may not glow at all for a short while after you begin charging your
controller.
Once you have switched on (point 1, above), you can also operate your
your smart device (see the app for details). Bluetooth
should not experience any problems with interference from other Bluetooth
any unexpected behavior while controlling your stimulator with the smart device, shut down the app and continue
your session using these on-board controls. Contact
SLENDERTONE CONNECT ABS
1
3
from the app on
SLENDERTONE CONNECT ABS
Smart provides a highly secure and reliable connection and you
®
® or wireless devices. If you do experience
for advice.
SLENDERTONE
product.
2
4
5
7