5. V erify AP Operation
6. C onnect to the
Web
User
Interface
Verify basic AP operation by checking the system LEDs.
1
2
When managed in a stand-alone mode, the AP offers a web-based
management interface for the configuration of all the unit's features. If
cloud-managing the AP, go directly to
Cloud Controller" on page 7.
To access the web interface, connect a PC directly to the AP's LAN1 or L AN2
RJ-45 port. You must first set your PC IP address to be on the same subnet
as the AP (that is, the PC and AP addresses must both start 192.168.2.x with
a subnet mask of 255.255.255.0). In a web browser, enter the AP's default
management IP address of 192.168.2.1 to access the web login page.
Note:
To reset the AP to factory default settings, press and hold down the AP's
Reset button for 5 seconds.
1
2
"Manage the AP with the IgniteNet
Log in to the web interface using
the d efault settings:
Login Name — root
◆
Password — a dmin123
◆
– 6
–
Quick Start
Guide
The W AN/PoE p ort l ink/activity
LED should be on/blinking green.
When connected, the LAN1
and LAN2 port link/activity
LEDs should also be
on/blinking green.
The system/wireless LED should
be on red when the AP is
powered on, or on/blinking green
(2.4 GHz) or blue (5 GHz).