Suspended Ceiling Mounting - IgniteNet Spark AC750 Quick Start Manual

Mounting the AP on the ceiling
If the room is equipped with a suspended ceiling, u se the mounting plate
provided in the package to attach the AP to the metal ceiling T-­bars.
The mounting plate supports two different sizes of suspended ceiling T-­bars.
The position illustrated below is for 15 mm bars. Use the position at a 90
degrees angle for 24.5 mm bars.
2
1
Suspended Ceiling Mounting
1
1
2
2
3
3
– 4
–
Quick Start
Guide
Press the retention clips of the mounting
plate against the ceiling T-­bar.
Rotate the plate until the T-­bar snaps into place.
Slide the rails on the back of the AP along the
sides of the ceiling mounting plate until it
snaps into its secured position.