Bissell POWERWASH LIFT-OFF 1190 User Manual page 6

A
Product View
Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all
instructions and operating procedures.
1 Spray Trigger
2 Upper Handle
3 Upright Cleaning Mode
Indicator Light
4 Carry Handle
5 Cleaning Tool (tools vary by
model)
6 Formula & Water Tank
7 Power Button
8 Quick Release™ Cable Wrap
9 Power Cable
10 Dirty Tank
11 Dirty Tank Carry Handle
12 Flex Hose
13 Portable Spot Cleaning
Release Pedal
14 EdgeSweep™ Brushes
15 Removeable Nozzle
Assembly
16 Cable Clip
17 Tool Storage
18 Support Handle
19 Tool Storage (select
models)
20 Hose Secure Latch
21 Recline Pedal
To reduce the risk of fire and electric shock
due to internal component damage, use only
BISSELL cleaning fluids intended for use with
the deep cleaner.
B
Assembly
There are two easy to assemble components:
A. Upper handle
B. Portable spot cleaner/Base
The only tool you will need to assemble
your cleaner is a long Phillips screwdriver.
1. Slide upper handle onto body of machine
by guiding 2 posts on body into opening on
upper handle.
2. Firmly holding upper handle in place,
screw 2 screws into marked holes at an
upward angle above support handle.
3. At an upward angle, screw remaining
2 screws into marked outermost holes
under support handle.
www.BISSELL.com
6
A-2 Cleaning
Formulas
Always use genuine
BISSELL deep
cleaning formulas.
Non-BISSELL cleaning
formulas may harm
the cleaner and will
void the guarantee.
22 1.5 L 2X Wash & Protect
PRO Professional Stain
& Odour Formula w/
Scotchgard™ Protector
23 1.5 L 2X Wash & Protect PET
Pet Stain & Odour Formula
w/ Scotchgard™Protector
24 1.5 L 2X Wash & Protect
Stain & Odour Formula
w/ Scotchgard™ Protector
25 1.5L 2X Wash & Refresh
Natural Orange Formula
26 650 mL Stain Pretreat
4. Wrap power cable around Quick Release
Cable Wrap.
5. Wrap flex hose around hose wrap and
secure with hose secure latch.
6. Align product as shown and firmly push
down portable spot cleaner until it is secured
on both sides.
To further check if portable spot cleaner is
secure, plug in and turn on to verify upright
cleaning mode indicator light is illuminated.
If it does not illuminate, release portable spot
cleaner and re-secure by pushing firmly until
both sides snap into place.
7. Check latches on both sides to confirm
it is secured. Refer to image 6.
8. Snap attachment(s) into back of unit.
NOTE: Portable spot cleaner must be fully
secure to operate in upright cleaning mode.
C
Operations
Special features
2-in-1 cleaning technology
This innovative deep cleaner offers two
machines in one. The upright deep cleaner
uses brushes and cleaning formula to
maximise cleaning. The portable spot
cleaner detaches to clean tough spots
and stains and hard to reach areas.
Heatwave Technology™
This deep cleaner features Heatwave
Technology to help maintain the tempera-
ture of the hand hot tap water you put in it
to provide constant heat as you clean. The
Heatwave Technology automatically turns
on when machine is turned on. Heatwave
Technology operates in both upright and
portable cleaning modes.
Scotchgard™ Protector
Carpet protection applied at the mill
typically wears down over time from
heavy foot traffic and everyday cleaning,
including deep cleaning. To help restore
this important protection, only BISSELL
offers Wash & Protect deep cleaning
formulas with Scotchgard protector. This
offers extra protection against dirt and
tough stains to keep your carpets looking
good longer.