Panasonic TK-AS45 Instruction Manual page 11

Attaching the Bypass Selector
Mounting nut
1
螺帽
2
Gasket
墊片
Adaptor
轉接器
Bypass selector Mounting nut
分水開關 螺帽
20
/安裝分水開關
(continued) （接續）
3
Attach the mounting nut and
adaptor.
安上螺帽和轉接器。
OThe adaptor should be screwed on
straight. Screwing it on tilted may strip
the threads, resulting in water leaks.
O要將轉接器垂直擰緊。斜著擰入的話 ， 會
損壞其螺紋 ， 造成漏水 。
4
Attach the bypass selector and
tighten the mounting nut.
安上分水開關， 然後緊固螺帽。
ODo not use any tools. (This may
damage the mounting nut.)
O不必使用任何工具 。 （這會損壞螺帽。 ）
• Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the
faucet is changed.
• 沒有使用到的零件，請妥善保存， 以備搬家或購買新水龍頭時之需求 。
Faucet without an aerator
• Water faucet which can attach the Alkaline Ionizer with
accessory.
無充氣器的水龍頭時
• 需用一附件才能將電解水生成器連接到水龍頭上。
Mounting nut
螺帽
Filter
過濾網
Gasket
墊片
Adaptor
Return to the original
(Not used)
position after removing.
轉接器
卸下後，將其放回原位 。
（不使用）
Do not remove the gasket
inside the bypass selector.
不要卸下分水開關內的墊片 。
Mounting nut
Remove the screws.
螺帽
(4 pcs.)
卸下螺絲（ 4個） 。
Installation adaptor
(Accessory)
安裝轉接器（附件）
Bulge
①
①
膨脹部
② ②
①more than 10 mm
②greater than 13 mm, less than 24 mm
①10 mm以上
②在13 mm 〜 24 mm之間
1
Remove the mounting nut and
adaptor.
卸下螺帽和轉接器。
OWhen the filter or gasket (made of
metal) drops off, please return to the
original position .
P. 47
O過濾網、墊片 （ 金屬製）脫落時， 請恢復原
狀 。
P. 47
2
Insert the installation adaptor,
and tighten it with the mounting
nut.
插入安裝轉接器並用螺帽將其緊
固。
21