Leveling The Unit - AGA marvel M36SS Operating And Maintenance Instructions Manual

Leveling the unit:

Unit MUST be installed level in all planes, on a floor that is
strong enough to support a fully loaded refrigerator/freezer.
See Figure 10.
This unit is equipped with front and rear rollers. Rollers
will aid during installation. Rear rollers are adjustable from
the front of the unit. Total adjustment is +
(7.9mm). Turn adjusting bolt with a
raise cabinet and counterclockwise to lower cabinet.
See Figure 11.
NOTE
Front leveling legs must be adjusted to the floor for leveling
and to prevent the unit from rolling during use. See
Figure 11.
Front
leveling
leg-
LEVELING THE UNIT
⁄ (7.9mm), - ⁄
5 5
16 16
⁄ " wrench clockwise to
7
16
-Rear Roller Adjustment Bolt
(Use ⁄ open end wrench or
7
16
socket and ratchet)-
Figure 11
11
Figure 10
-Both front leveling legs must be
adjusted to floor after leveling