Leveling The Unit - AGA marvel M24TF Operation Manual

Leveling the unit:

Unit MUST be installed level in all planes, on a floor that is
strong enough to support a fully loaded refrigerator/freezer.
See Figure 12.
This unit is equipped with front and rear rollers. Rollers will
aid during installation. Rear rollers are adjustable from the
front of the unit. Total adjustment is +
ing bolt with a ⁄ " wrench clockwise to raise cabinet and
7
16
counterclockwise to lower cabinet. See Figure 13.
NOTE
Front leveling legs must be adjusted to the floor for leveling
and to prevent the unit from rolling during use. See
Figure 13.
Front
leveling
leg-
LEVELING THE UNIT
⁄ , - ⁄ . Turn adjust-
5 5
16 16
-Rear Roller Adjustment Bolt
(Use ⁄ open end wrench or
7
16
socket and ratchet)-
Figure 13
11
Figure 12
-Both front leveling legs must be
adjusted to floor after leveling