Programme Edit - Sanyo LCD-40XR10F Instruction Manual

Memorizing the Channels & Programme Edit
ATV manual tuning
- analogue only -
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning

Programme Edit

File System
SELECT MOVE
ATV Manual Tuning
Storage To
System
Current CH
Search
Fine-Tune
Frequency
445.25 MHz
EXIT SAVE
Adding or changing a channel label
- analogue only -
PICTURE SOUND TIME OPTION
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
File System
SELECT MOVE
Programme Edit
TV 1 S-03
2 C-42
TV
3 S-04
TV
4 C-04
TV
DEL NAME MOVE
Use the Manual Tuning operation if desired channels can not be preset
by Auto Tuning or if you would like to preset channels to specific
position numbers one by one.
1
In CHANNEL menu, press 6
Tuning, then press4
LOCK CHANNEL
2
From ATV Manual Tuning setting menu, press 6
an item, press 3
A. Storage To: Position selection. Press 3
the position you want to store.
B. System: Sound system selection. If certain channel's sound is
RETURN
MENU
abnormal, it may be that the sound system setting is wrong. In
this case, select another sound system.
11
C. Current CH: Selects current channel using 3
BG
D. Search: Channel search operation.
C-02
Press 4
Press 3
E. Fine-Tune: Manual fine tuning.
SELECT
Press 3
F. Frequency: Shows current frequency, it can not be adjusted.
(During the process, you can press EXIT to exit the operation.)
3
Press RED button to save your settings.
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
Press MENU. Press 3
1
6
LOCK CHANNEL
Press 6
2
open the Programme Edit menu and a programme list is
displayed.
3
Within the programme list, press 6
want to label, press GREEN button to start to label. A cursor
appears at the edit field.
RETURN
MENU
4
Use 6
When finished, press OK to confirm.
The maximum length of label is 5 characters.
5
Repeat the above steps to label more channels.
SKIP
Fav.List
Note: The labels of DTV channels are automatically assigned and
cannot be changed by user.
or OK to access the setting menu.
or4 to set the item as shown below.
to search up the band or3
or4 repeatedly until your desired channel is displayed.
or4 until better picture and sound are obtained.
or4 to select CHANNEL menu, press
to access.
to select Programme Edit, press 4
or5
or5 to select a character, use 3
or5 to select ATV Manual
or5 to select
or4 button to select
or4 .
to search down the band.
or OK to
or5 to select a channel you
or4 to move the cursor.
19