Call Forward - Remote (I'm Here) - Mitel 5212/5224 User Manual

Call Forward - Remote (I'm Here)

To forward calls from a remote station to your current location:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. Press # or the Next softkey until "I Am Here" appears.
5. Press * or the Yes softkey.
6. On a 5212 IP Phone only, if a number is already programmed, press *
twice.
7. Dial the extension of the remote station.
If you make an error while dialing, use the # or the <— softkey to
backspace and correct the number.
8. Press ( DOWN ) or the Save softkey.
To cancel Call Forward – Remote from the station that set the remote
forwarding:
1. Lift the handset.
2. Dial **77.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward – Remote from the station that was forwarded:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. Press * or the Review softkey.
5. Press * or the Change softkey.
6. Press # or the TurnOff softkey.
7. Press ( SUPERKEY ).
-26-