1.0
Figure 1a: Dimensions / Connections for VFC 15-150
INSTALLATION
VFC 15-150, VFC 45-225 MODULATING GAS BOILERS
INSTALLATION
1.1
GENERAL
VFC gas-fired modulating boilers are low pressure, fully condensing units having
variable input ranges (a) 15 MBH (15,000 Btu/hr) to 150 MBH (15-150 model,
0 to 12,000') and (b) 45 MBH to 225 MBH (45-225 model, 0 to 12,000'). The
boilers are approved as "Category IV" vented appliances using either Direct
Vent (sealed combustion) or indoor combustion air, providing a great degree of
installation flexibility.
Figure 1 shows outer case dimensions and piping and electrical holes. Use this
diagram to find a suitable location for the boiler. See also Section 1.3 Location.
DESCRIPTION
A
Water Outlet
B
Water Inlet
C
Gas Inlet
D
Knock-outs (6)
E
Touch Screen Display
F
Exhaust Vent
G
Combustion Air
Table 1: Connections
SIZE
1-1/4" NPT-M
1-1/4" NPT-M
1/2" NPT-F
1/2"
2-1/4" x 4"
4.0" Hole
4.0" Hole
Figure 1b: Dimensions / Connections for VFC 45-225
1-1