Remote Sensor (Thn122N); Getting Started; Batteries - Oregon Scientific BAR888Ra User Manual

Wall mount holder:
Supports the remote
unit in wall mounting

REMOTE SENSOR (THN122N)

Removable table
stand: For standing
the remote unit on a
flat surface
1. LED status indicator

GETTING STARTED

BATTERIES

Batteries are not supplied with this product. You will
need to purchase the following alkaline batteries: Main
unit 4 x UM-3 (AA) 1.5V, THR268 sensor 2 x UM-3
(AA) 1.5V and THN122N sensor 2 x UM-4 (AAA) 5V.
Insert batteries before first use, matching the polarity
as shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
NOTE Do not use rechargeable batteries.
shows when batteries are low.
4
1. Wall mount hole
2. RESET hole
3. CHANNEL number
(1-3)
4. Battery compartment
(Battery compartment
cover not shown)