Safety Instructions - Hilti PRI 36 Operating Instructions Manual

Center indication from top edge of casing
Marking notches
Automatic power-off
Dimensions
Weight (including batteries)
Power source
en
Battery life (alkaline-manganese)
Operating temperature range
Storage temperature range
Protection class
PUA 81 AC adapter for PSA 81, PRA 84, PRA 84 G batteries and PSA 100 monitor
Rated supply current
AC frequency
Rated power
Rated voltage
IP protection class
Operating temperature range
Storage temperature range (dry)
Charging temperature
Weight
Dimensions (L x W x H)
PRA 84 G Li-Ion battery
Rated voltage (normal mode)
Maximum voltage (during operation or during charging
while in operation)
Rated current
Capacity
Charging time
Operating temperature range
Storage temperature range (dry)
Charging temperature range (also for charging during
operation)
Weight
Dimensions (L x W x H)

5 Safety instructions

5.1 Basic information concerning safety
NOTE
Keep all safety instructions and information for future
reference.
In addition to the information relevant to safety given
in each of the sections of these operating instructions,
22
Printed: 14.04.2014 | Doc-Nr: PUB / 5162032 / 000 / 01
75 mm
On both sides
When no beam is detected: 15 min
160 mm X 67 mm X 24 mm
0.25 kg
2 AA batteries
Temperature +20°C: Approx. 40h (depending on bat-
tery quality)
-20...+50°C
-25...+60°C
IP 56 (in accordance with IEC 60529) except battery
compartment
115...230 V
47...63 Hz
36 W
12 V
IP 56
+0...+40°C
-25...+60°C
+0...+40°C
0.23 kg
110 X 50 X 32 mm
7.2 V
13 V
270 mA@7.2 V
7.2 V/ 6 Ah
3 h / +32°C / Battery is 80% charged
-20...+50°C
-25...+60°C
+0...+40°C
0.3 kg
160 mm X 45 mm X 36 mm
the following points must be strictly observed at all
times.