Removing & Installing Body Components; Seat - Honda CB500X Service Manual

Removing & Installing Body Components

Seat

Ignition key Tab Recess
Seat lock
Front stay
56
Front prong
Rear
prongs
Seat
Rear stays
http://www.motorcycle.in.th
❙
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the seat back
and up.
❙
Installation
1. Insert the front and rear prongs into the
front and rear stays on the frame.
2. Insert the recess into the tab.
3. Push forward and down on the rear of the
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.