Honda CB500X Service Manual page 95

Tyre Puncture
u
❙
Rear Wheel
Removal
1. Support your motorcycle securely and
raise the rear wheel off the ground using
a maintenance stand or a hoist.
2. Loosen the rear axle nut, lock nuts and
turn the adjusting nuts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
3. Remove the drive chain from the rear
wheel sprocket by pushing the rear
wheel forward.
4. Remove the rear axle nut and washer.
92
Removing Wheels
http://www.motorcycle.in.th
Rear axle shaft
Drive chain
Pulser ring
CB500XA only
Lock nut
Adjusting nut
Washer
Adjusting nut
Lock nut
Wheel speed sensor
CB500XA only
Rear
axle nut
Washer