Travis Industries 864 HO NB GSR2 Installation Manual page 43

3. Follow the directions below to replace the orifices.
1/2" Wrench
4. Install the new manifold cover included in the LP conversion kit (see illustration below).
© Travis Industries
Installation
Rear Burner Orifice
Front Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
(for qualified installers only)
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
Front
Rear
4140922
b
NG LP
#48 1.25mm
#39 .0625"
43
100-01410