Replacing The Battery-Connector Board; Procedure; Post-Requisites - Dell Inspiron 17 5000 Series Service Manual

Replacing the battery-
connector board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the battery-connector board with the screw
holes on the palm-rest assembly.
2 Replace the screws that secure the battery-connector board to the palm-
rest assembly.
3 Route the antenna cable through the routing guides on the battery-
connector board.
4 Adhere the tapes that secure the antenna cable to the palm-rest
assembly.

Post-requisites

1 Replace the system
2 Replace the heat-sink
3 Replace the I/O
4 Follow the procedure from step 3 to step 8 in
base".
5 Follow the procedure from step 4 to step 7 in
drive".
6 Replace the keyboard.
7 Replace the memory
8 Replace the wireless
9 Follow the procedure from step 4 to step 6 in
10 Replace the base
11 Replace the battery.
70
computer. After working inside your
board.
assembly.
board.
modules.
card.
cover.
After working inside your
"Replacing the computer
"Replacing the optical
"Replacing the hard drive".