Jenn-Air C1200 Series Use And Care Manual page 7

The grill accessory consists of two black grill grates, a grill element and a grill .....
liner pan.
To Install Grill
1. Before installing grill components, be certain surface controls are in the OFF position.
2. Place the grill liner pan into an empty basin pan with the opening next to the terminal
block. The grill liner pan must be used since it supports the grill element.
3. Position the grill element with the terminal plug towards the terminal receptacle. Slide
the element towards the receptacle until the terminal plug is completely engage r'
The grill element should rest flat on the side ledges of the grill liner pan. _._
4. Place the black grill grates on the top of the basin pan.
To Remove Grill
1. Remove grill components once they are cool. Be sure control switches are in the
OFF position.
2. To remove grill element, lift the side at the ventilation chamber until the top of the
element is about 1/2 inch above the cooktop. (NOTE: Lifting the element too high
while still engaged in the receptacle could damage the terminal plug.) To disengage
terminal, slide away from the terminal receptacle. Lift out when fully unplugged.
Grill Covers
1. Grill covers can be used to cover the grill, when not in use, or an empty basin pan.
2. To remove the grill covers, push down on front or rear side. The opposite side will
lift slightly for easy removal.