Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RIKA Domo
Summary of Contents for RIKA Domo
- Page 1 DOMO Operating Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1. PREFACE Explanations to symbols ...................................3 Spare part overview exploded diagram ..............................4 Spare part overview article numbers .................................6 Dimensions ......................................7 Amount of fuel ......................................7 Technical data ......................................7 Packaging .........................................7 Electrical connection ....................................7 2. IMPORTANT INFORMATION General warning and safety information ..............................8 First heating......................................8 Safety distances ......................................8 Prior to set up ......................................9... -
Page 3: Preface
7. COMFORT OPTIONS RIKA room sensor/RIKA radio room sensor ............................16 RIKA GSM Control ....................................16 RIKA interface for various options .................................16 External room thermostat ..................................16 External connection cable bridge ................................16 Option RIKA firenet ....................................16 8. CLEANING AND MAINTENANCE Basic information ....................................17 Open the combustion chamber door ..............................17... -
Page 4: Spare Part Overview Exploded Diagram
Spare part overview exploded diagram... - Page 5 1 24 1 1 4 1 20 1 21 1 22 1 22 1 23 1 23 1 1 7 1 1 3 1 0 0 1 0 2 1 1 6 1 0 3 1 1 8 1 0 1 1 1 5 1 0 4 1 1 4...
-
Page 6: Spare Part Overview Article Numbers
Turning grid motor cpl. N111965 Washer D05 Z35691 Spring plug B17166 Ceramic ignition N108485 Allen screw N112136 Taptite B17411 Cabletree Domo B17407 Shutter N112018 Z35018 Cable 2m for touch-display L02647 Closure plate N110461 Double ball catch MultiAir and connect rear centre N100242... -
Page 7: Dimensions
Dimensions Technical data R O - T 3 R O - S Technical data Heating power range [kW] 3-10 Room heating capacity (depending on house [m³] 70-260 insulation) Fuel consumption [kg/h] bis 2,4 Pellet container capacity [l]/[~kg] 76/~50 Electric supply [V]/[Hz] 230/50 Average electrical input... -
Page 8: Important Information
First heating RIKA stoves should only be installed in rooms with normal humidity (dry The stove body, just as various steel parts, cast iron parts and the flue pipes areas according to VDE 0100 Part 200). The furnaces are not splash water are painted with a heat resistant paint. -
Page 9: Prior To Set Up
Prior to set up Stoves type 1 (BA 1): Floor bearing capacity Suitable for multiple occupancy. (Note the different country regulations.) Ensure that the substructure is capable of bearing the weight of the stove prior to set-up. These may only be operated with the combustion chamber door closed. Note The combustion chamber door is to be kept closed when the stove is not No modifications may be made to the firing installation. -
Page 10: Brief Information On Fuel Pellets
3. BRIEF INFORMATION ON FUEL PELLETS Your pellet stove is only approved for the burning of pellets of tested quality. What are pellets? Please ask your pellet stove dealer for tested fuel and a list of monitored fuel manufacturers. Wood pellets are a standardised fuel. Every manufacturer must adhere to certain conditions in order to enable flawless, energy-efficient heating. -
Page 11: Technology And Safet Y Functions
4. TECHNOLOGY AND SAFET Y FUNCTIONS The technological advances in your new combi stove are the result of years of Automatic cleaning cycle testing and practical experience. The practical advantages of your pellet stove are convincing: The speed of the flue gas fan is increased every hour for a short period to blow ash from the burn pot, increasing the operational safety. -
Page 12: Installing The Stove
The stove can also be pushed on this cardboard or carpet. Feeding in external combustion air We recommend original flue pipes from RIKA for proper connection. only for devices which are able to run in room-air independent operation. Connection to the chimney Combustion air must be fed to the stove from outside via a sealed pipe for operation independent of the room air. -
Page 13: Assembly/Dismantling Stone And Options
Rear top range 90 degree elbow with cleaning lid* Top range straight flue pipe* *from the standard RIKA flue pipe Dimensions of options flue gas connection R1 = RH2 = RH3 = RH4 [cm] Replace the flue gas stack and the top cover against each other. -
Page 14: Converting To Side Connection R3 + R4 And Connection Rear In The Center R2
Put on a 90 degree elbow with cleaning lid and then another 45 degree elbow, Place the correspondent flue pipe on the side. Make sure that everything is which has to be cut off about 4 cm, to reach the top center connection of the tight! flue gas pipe. -
Page 15: Assembly/Dismantling Stone
Assembly/Dismantling stone Now you can take off the top stone to the front. Note Only work on the unit when the mains plug has been disconnected and the stove has cooled completely. Note During assembly / dismantling do not allow objects (screws etc.) to fall into the pellet container –... -
Page 16: Comfort Options
This requires a 2-pole cable of 0.5 – 0.75 mm² cross-section that you have to connect instead of the cable bridge fitted for The RIKA firenet module connects your stove to the Internet. You can operate delivery the stove with any Internet-enabled device (tablet, PC, Smartphone ...). -
Page 17: Cleaning And Maintenance
8. CLEANING AND MAINTENANCE Basic information Cleaning the flame temperature sensor Remove the dust deposits from the sensor at regular intervals. Use a clean Note cleaning cloth or newspaper. Ensure that you do not vacuum into the combustion air line during heating operation during any cleaning (vacuuming). -
Page 18: Cleaning Flue Gas Paths
Cleaning flue gas paths Loosen the two hex screws under the ash door and open the outer cleaning lid. The flue pipes should be cleaned at least 2 x a year or after approx. 700 kg pellets. The flues are behind the combustion chamber. Open the decorative glass door by pushing the button on the display before you unplug the stove from the power supply. -
Page 19: Cleaning The Convection Air Openings
Cleaning the convection air openings Cleaning the flue gas channels Vacuum clean any dust deposits from the convection air openings at regular annually intervals. Remove the flue pipes. Inspect and clean chimney connection. Brush off any The stove should be cleaned thoroughly prior to the start of the heating season soot and dust deposits in the fire and in the flue pipes and vacuum. -
Page 20: Problems Possible Solutions
9. PROBLEMS POSSIBLE SOLUTIONS Problem 1 Problem 3 Fire burns with weak, orange flame. Pellets heap up in fire trough, window Flue gas discharge when wood is added and during heating phase. sooted up. Cause(s) Cause(s) Inspection openings leak Insufficient combustion air Chimney draught too low Poor chimney draught Flue pipe connection leaks... -
Page 21: Instructions For Commissioning Protocol
Note points, is a document. Please return 1 completed protocol for putting into service to RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Micheldorf, Austria. Warranty terms Difference between warranty (statutory) and guarantee (voluntary), terms of guarantee, determination of wearing parts, reference to pellet quality to be Electrical periphery used and the consequences of poor quality. - Page 22 Please contact your warranty partner for any warranty questions or claims. This is your dealer or installation company. No warranty claims can be accepted without proper putting into operation, proper operation according to the operating instructions and the supplements in this information sheet. Protocol for putting into operation for RIKA pellet and combi stoves Date:____________________...
-
Page 23: Guarantee
In case of doubt as well as missing or incorrect translations, the German version is the only valid one. For the purpose of timely damage limitation, the warranty claim on the part of the claimant is to be enforced at the RIKA dealer in writing using the invoice and stating the purchase date, model name, serial number and reason for complaint. - Page 24 Technical and design changes, as well as typesetting and printing errors reserved © 2015 | RIKA Innovative Ofentechnik GmbH RIKA Innovative Ofentechnik GmbH 4563 Micheldorf / Austria, Müllerviertel 20 Telefon: +43 7582 686 - 41, Fax-DW: 43 E-Mail: verkauf@rika.at RIKA.AT...
Need help?
Do you have a question about the Domo and is the answer not in the manual?
Questions and answers