Subscribe to Our Youtube Channel
Related Manuals for RIKA Austroflamm Integra II
Summary of Contents for RIKA Austroflamm Integra II
- Page 1 Austroflamm Integra II / Visio / Premio Pellet Stoves User Control Panel Operating Guide Page 1 of 9 Revision 3.0 copyright © 2008 Lucky Distributing, Inc.
-
Page 2: Basic Operation
“+” and “–“ buttons. Your RIKA pellet stove is equipped with an electronic ignition start-up system. Starter fluids or gels are not necessary and should never be used. Simply push the power button and the unit will ignite within a 12-minute period of time. Total start-up cycle time is 21 minutes. - Page 3 STARTING / PROGRAMMING THE CONTROL The display should now read “S2” for the When the hopper is filled for the first time or if it second heating period on Monday. Change is allowed to run empty, it can take up to two full the time by pressing the “+”...
-
Page 4: Programming The Control
PROGRAMMING THE CONTROL After pressing enter on the “PE” output The display should now read “VU” after 1.35 setting, the display should read “CF” which pressing enter on the “CL” cleaning cycle represents convection speed setting; the number represents the current increase over normal. - Page 5 PROGRAMMING THE CONTROL If you intend to operate your stove manually, set it to the manual mode by pressing the ENTER button until the display no longer reads either “SB” or “TM”. During start-up, the stove will read “ST” on the first display line, and “21”...
-
Page 6: Control Flow Chart
CONTROL FLOW CHART Page 6 of 9 Revision 3.0 copyright © 2008 Lucky Distributing, Inc. - Page 7 KEYWORD / ABBREVIATIONS LIST Key word / Name Description Abbreviation Standby-Mode Standby mode (fire switched off, but active for triggering via the control) Convection Fan Convection fan speed increase setting over normal or reference to either Combustion Fan the combustion or convection fan Configuration profile to facilitate the use of lower grade fuel, or for Fuel Use Type installations where additional combustion fan speed is needed.
-
Page 8: User Notes
USER NOTES This page is provided for your use to record your Time Mode (TM) schedule and other operating notes or obvservations. My Heating Schedule Heating Cycle Heating Cycle (S1) (E1) (S2) (E2) Monday Start ______ End ______ Start ______ End ______ Tuesday Start ______ End ______ Start ______ End ______... - Page 9 Page 9 of 9 Revision 3.0 copyright © 2008 Lucky Distributing, Inc.
Need help?
Do you have a question about the Austroflamm Integra II and is the answer not in the manual?
Questions and answers