Miele CM6110 Operating Instructions Manual page 71

Problem
The descaling
programme was started
by mistake.
Coffee is not flowing
out of the central spout,
or is only being
dispensed via one
spout.
Milk is dripping or
running out of the
central spout even
though no milk is being
dispensed.
The display lights up
but the coffee machine
does not heat up and no
drinks are made.
The coffee machine
cannot be turned off
with the On/
Off  sensor.
Possible cause and remedy
The descaling programme cannot be stopped once
the OK sensor has been touched.
Descaling must be continued through to completion.
This is a safety precaution to make sure the machine
is descaled correctly. This is important for the
longevity and functional efficiency of your coffee
machine.
 Descale the coffee machine (see "Descaling").
The central spout has a blockage.
 Rinse the coffee pipework (see "Cleaning and care
- Rinsing the machine").
If there is still no coffee coming out, or coffee is only
coming out of one side:
 Dismantle the central spout and clean all parts
carefully (see "Cleaning and care - Central spout
with integrated cappuccinatore").
 Make sure all parts are reassembled correctly.
The level of milk in the milk flask is higher than the
central spout.
 Push the central spout up as far as it will go.
The Demo mode of the coffee machine for Miele
Experience Centres or Chartered Agents has been
activated.
 Deactivate the Demo mode (see "Settings - Demo
mode").
Problem solving guide
71