Day And Time Announcements - AT&T 1855 User Manual

ATT-1855CIB-d05.qxp
1
CLOCK
"Sunday"
2
SKIP/REPEAT
"Monday"
Press until correct day is spoken.
3
CLOCK
"12 PM"
4
SKIP/REPEAT
"1 PM"
Press until correct hour is spoken.
5
CLOCK
"0"
6
SKIP/REPEAT
"1"
Press until correct minute is spoken.
7
CLOCK
"2004"
8
SKIP/REPEAT
"2005"
Press until correct year is spoken.
9
CLOCK
"Monday, 1 pm, 2005"
4/8/2005 5:38 PM Page 18
Answering System Operation

Day and time announcements

To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
To begin, press and hold the
The system uses voice prompts to guide you.
Each time you press
advances by one. Each time you press
hour, minute or year is reduced by one.When you hear
the correct setting, press
setting.
To check day and time
You can press
current day and time without changing it.
NOTE: The answering system must be on to review or change settings.
18
button for 2 seconds.
CLOCK
, the day, hour, minute or year
SKIP
REPEAT
to move to the next
CLOCK
at any time to hear the
CLOCK
, the day,