AT&T 1855 User Manual page 9

ATT-1855CIB-d05.qxp
Getting Started
Wall mounting
Plug line cord into telephone, then wrap
cord around posts as shown below. Leave a
few inches free, enough to route wire under
tabs and plug into the wall jack.
After cords are connected, press and
slide down firmly so phone is held
securely on outlet mounting pegs.
4/8/2005 5:37 PM Page 7
Line cord
Plug power cord transformer
into electrical outlet.
Remove handset cradle tab, rotate and replace to
hold handset securely in place when wall mounted.
7
Power cord